Thorens TD 850 Bedienungsanleitung PDF herunterladen (Seite 3)

power cable to the AC/AC adaptor.

CAUTION! Never plug or unplug a motor while the Ps

800 is running. It will be damaged!

The Ps 800 power pack gets warm make sure that it is stan-

ding free so that the air can circulate.

On the Front of the Ps 800 are 2 switches. The left one is

for switching the Ps 800 on and off. An LED indicates the

operation. The right one is the speed selector. The you can

select between 33 and 45 rpm.

Because of an overload protection you must let the

turntable run for 33 rpm before switching to 45rpm. If

you do not do that the turntable will not spin at 45rpm.

Connecting the tonearm

Use the supplied RCA cable(Blue) and plug it into the plugs

on the back side of the turntable behind the tonearm. White

is left and red is right channel.

If your tonearm has not been supplied from Thorens please

use the manual supplied with the tonearm to make the

connection correct. This is only for turntables with Thorens

TP 250 or TP 300 tonearm factory mounted.

So now your turntable is ready to play.

If you have any questions please contact our service at:

or your local distributor.

Thorens TP 300

Anti Skating(Bias) adjustment

Set the bias adjustment knob to the same number as the

tracking force. NOTE: This setting is not critical and a figu-

re of 1-1.5g will normally be suitable for moving magnet car-

tridges and 1.5-2g for most of the MC cartridges.

1 2 3 4

Keine Kommentare

Thorens TD 850 Bedienungsanleitung Seite 3